News

Diamond Drilling

Diamond drilling holes is a fundamentally new approach to construction. That we could get before. 1. Contented people buying a new apartment, say, 3 / 9 floor and started repairs. Everything is wonderful, but now he decided to put air conditioning ventilation system, he knows that it is beneficial to his health, the problems begin. Under the ducts need holes, what to do? He calls the builders, they take hammer and poor neighbors, noise, dust and broken-down wall. And if we pokleit wallpaper first, the complete collapse of repair. 2.

What brought us to 21. Diamond drilling. Yes. Called by a team of professionals within a few hours will drill any hole, and you wonder how so quickly and with virtually no dust and debris. And most importantly that even if you have made repairs, then all these actions will not harm him. Call the professionals. And 1.

The specialists examined for the presence of wall postings, that would not spoil it for drilling. Mark out a place of future openings. And put the installation. 2. Installing on many compact that it can be installed even in a suspended ceiling. Starts drilling. 3. After drilling is a small ring around the hole and stud-mount installation (later cut), most interesting is that at finishing the drilling water is used for cooling and dust, so to finish, we use a vacuum cleaner to collect water. And do not drown the neighbors, as it would was the application of a typical installation. 4. On the other side of the wall, we get: – smooth round hole – a clean wall with no cracks and chips – the dust is not by definition 5. By the way, if you come across in the way of the crown reinforcement, metal design, the crown sawing them like butter, which is not under the power of conventional builders with a mallet or hammer. + Purity in the finishing room, free of dust. + Entire walls without cracks + cut steel and rebar + Geometrically flat surfaces, as you ordered